Lame Circolari
Focalizzati nella costante ricerca e sviluppo di nuovi acciai che possano migliorare le caratteristiche di durata e resistenza nelle diverse applicazzioni,le nostre lame vengono prodotte con gradi diversi di precisione e finitura per poter garantire il massimo delle performance sulla tipologia di materiale da tagliare.
Trattamenti termici sottovuoto di alta qualita’ esaltano le performance e la durata delle lame.
I parametri piu’ importanti per una lama sono:
- Massima resistenza del filo tagliente
- Adeguata tenacita’
- Massima resistenza alle scheggiature
- Tolleranze ristrette sul spessore, planarita’ e parallellismo
Emmebi puo’ produrre lame fino a 600mm di diametro esterno con finitura rettificata e fino a 420mm di diametro esterno con finitura Lappata.
Toughness Wear Resistance Graph
Commody used Knife grades for different applications:
| Tool Materials | Applications |
| AISI-D3/1.2080 | Thin gauge of ferrous and non-ferrous materials |
| AISI-D2/1.2379 | Medium gauge mild steel and thin gauge stainless steel,silicon steel, heat treated steel and thick gauges of non ferrous |
|
AISI-H13(M)/1.2345 &AISI-H13/1.2344 |
Heavy gauges of stainless steel and mild steel, structural steel with high hardness where toughness is important |
| DIN 1.2990 | Structural steel, constructional steel (with high manganese and carbon content). High Strength Material upto 1600MPa, Heat Treatable steel |
| DIN 1.2714 | Medium and heavy gauge slitting but medium degree of toughness is required |
| DIN 1.2694/HPS | Extra thin gauges of the very hard material like hardened stainless steel |
| AISI-MS/1.3343 (H.S.S.) | Thin and extra thin gauges: for narrow and tight slitting with high quality of slit edge |
| PM Grades ASP23, 30 | Better life (2x-3x) compared to Conventional HSS |
| Carbide | CRGO, thin gauges of high tensile materials, very high tonnage between 2 regrinds |
Achievable manufacturing tolerances on Knives & Metal Spacers:
| OD | Precision Grade | Extra Precision Grade | |||||
| Thickness | Fatness (Within) | Thickness | Flatness (Within) | ||||
| (in mm) | Tolerance | T≤2 | 2<T≤5 | T>5 | Tolerance | 2<T≤5 | T>5 |
| Upto 255 | ±0.003 | 0.1 | 0.040 | 0.010 | ±0.001 | 0.020 | 0.00 |
| 255≤D≤365 | ±0.004 | 0.1 | 0.050 | 0.015 | ±0.001 | 0.030 | 0.005 |
| 365≤D<435 | ±0.005 | 0.1 | 0.060 | 0.020 | ±0.003 | 0.040 | 0.006 |
| Above 435 | ±0.006 | 0.1 | 0.070 | 0.025 | ±0.004 | 0.050 | 0.010 |
General Bore Tolerance: G6, G7, H7, F7, F8
General OD Tolerance: 0/-0.02mm
*Any special tolerance for parallism, flatness and bore can be made as per customer requirement
**All the dimensions are in mm